Wednesday, February 2, 2022

Biomedical Engineering MCQs








Q.1: Quality control is aimed at:

 

a.      Maintaining the desired quality

b.      Exceeding the desired quality

c.      Continuously improving the quality

d.      Following the quality

 

Q.2: Which of these is correct with respect to a product developed or a service performed?.

 

a.    Bad quality is acceptable, but bad grade is not.

b.    Bad grade is acceptable, but bad quality is not.

c.     Neither bad grade nor quality is acceptable.

d.    Grade and quality is the same thing.

 

Q.3: Project A has an internal rate of return (IRR) of 21 percent. Project B has an IRR of 7 percent. Project C has an IRR of 31 percent. Project D has an IRR of 25 percent. Which of these would be the BEST project?

 

a.    Project A

b.    Project B

c.     Project C

d.    Project D

 

Q.4:    What characteristic best describes the cost baseline?

 

a.    Total budget for the project

b.    Time phased budget for the project

c.     Total budget for the project including the contingency budget

d.    Total budget for the project including the contingency budget and the management reserve.


Q.5:    Present worth is:

 

a.    The discounted future cash flows to the present

b.    The compounding present cash flows to the future

c.     The current market value of the investment

d.    The opportunity cost at the present value.

 

Q.6:    The first preferred way to resolve a dispute between the contracting parties is:

 

a.    Arbitration

b.    Litigation

c.     Negotiation

d.    Mediation

 

Q.7:      Following document define the legal rights and obligations of the parties and may be described as the regulations under which the contract will be performed.

 

a.      Specifications

b.      General Conditions of Contract

c.      Special provisions

d.    Bill of Quantities

 

Q.8:    The minimum notice period for National Competitive bidding is:

 

a.    30 days

b.    45 days

c.     35 days

d.    15 days

 

Q.9:    Tsunamis’ is generated by:

 

a.    Earthquake

b.    Air currents

c.     Tidal waves

d.    Large Ocean waves

 

Q.10:    Globalization has direct impact on:

 

a.    National security

b.    Economy

c.     Society

d.    All above

 

Q.11:    The passive voice for the sentence “He is writing a letter” is;

 

a.      A letter is wrote by him

b.    A letter is written by him

c.     A letter is being written by him

d.    A letter is been written by him


Q.12:    Choose the correct sentence

 

a.    He is elder than me

b.    He is older than me

c.     He is ager than me

d.    He is older than I

 

 

Q.13:    Effective communication is

 

a.    The transfer of message from sender to receiver

b.    Sending of massage

c.     Receiving of message

d.    The transfer of message from sender to receiver and get the desired response.

 

Q.14:    Body language is form of;

 

a.    Personality and attitudes

b.    Non verbal communication

c.     Individual preference for expression

d.    The body expression

 

Q.15:       Project feasibility report is aimed at;

 

a.    Informing the people

b.    Attracting the customer

c.     Justifying the investment

d.    Giving details of resources

 

Q.16:    Research Proposal synopsis is developed at;

 

a.    Final stage of research

b.    Initial stage of research

c.     Before approval of research proposal

d.    In the middle of research

 

Q.17:    Project monitoring is required:

 

a.    Before commencement of the project

b.    During implementation of the project

c.     After completion of the project

d.    At any stage of the project deemed necessary

 

Q.18:    Re-appropriation Statement is form of

 

a.    Progress report

b.    Budget report

c.     Financial report

d.    Normal report


Q.19:    PC-III (A) is used for

 

a.    For weekly progress report of public sector projects

b.    Monthly progress report of public sector projects

c.     Yearly progress report of public sector projects

d.    Quarterly progress report of public sector projects.

 

Q.20:      Acquiring management and leadership skills are                                   for a Professional Engineer

a.    Wastage of time

b.    Not important

c.     Highly important

d.    Not necessary

 

Q.21:     Engineering ethics refers to:

 

a.    The rules and standards given by an institution for Engineering practice

b.    The rules and regulation relating to obligations and rights of others.

c.     The professional regulation

d.    The rules and standards which govern the conduct of Engineers as professional Engineers.

 

Q.22:     How many commandments are given in PEC Code of Ethics?

 

a.      20

b.      30

c.      10

d.      05

 

Q.23: As per PEC Code of Conduct a member shall report unethical professional practices of an engineer or a member with substantiating data to

 

a.    Court of Law

b.    Concerned Department

c.     Pakistan Engineering Council

d.    Law enforcing Agency

 

Q.24:    When a member uses designs, plans, specifications, data and notes supplied to him by a client or an employer or are prepared by him in reference to such client or the employer's work such designs, plans, specifications, data and notes shall remain the property of the   and shall not be duplicated for any use without the express permission of the                   .

 

a.    Member, Member

b.    Client, Client

c.     Member, Client

d.    Client, Member


Q.25: As per PEC Code of Conduct to maintain, uphold and advance the honor and dignity of the engineering professional, a member shall do following except:

 

a.    uphold the ideology of Pakistan

b.    be honest, impartial and serve the country, his employer, clients and the public at large with devotion.

c.     Uphold personal interest first

d.    use his knowledge and skill for the advancement and welfare of mankind

 

Q.26: Conflicts are faced when:

 

a.    There are more than one expected outcomes

b.    There are more than one expected benefits and losses

c.     There is choice between two or more moral values each having its own merits.

d.    There are opposing outcomes.

 

Q.27: An example of a conflict of interest would be:

 

a.    As a responsible official you make a decision about a contract award that will benefit you personally

b.    You and a functional manager disagree with a task cost estimate

c.     Your sponsor decides to cancel your project because it no longer supports the company strategy

d.    Your personality conflicts with that of a key member of your project team.

 

Q.28: Adherence to professional ethics is                                 an engineer to society.

 

a.    Not obligation of

b.    An obligation of

c.     Optional for

d.    None of above

 

Q.29: While designing a project by an engineer,                                   should be taken into account to protect cultural heritage

a.    All possible alternates

b.    No protection

c.     Minimum protection

d.    No care

 

Q.30: Close interpersonal relationships are characterized by high intimacy whereas distressed relationships tend to involve reciprocation of                                behaviour.

a.    positive

b.    negative

c.     normal

d.    casual

Answers:

 

1.                              a

2.                              b

3.                              c

4.                              b

5.                              a

6.                              c

7.                              a

8.                           d

9.                           a

10.                     d

11.                     c

12.                     b

13.                     d

14.                     b

15.                     c

16.                     c

17.                     b

18.                     c

19.                     b

20.                     c

21.                     d

22.                     c

23.                     c

24.                     b

25.                     c

26.                     c

27.                     a

28.                     b

29.                     a

30.                     b


No comments:

Post a Comment